Warnings and Precautions
GB
1. Never disassemble or adjust the unit without any professional guide. For details, please consult any pro-
fessional car shop/dealer for inquiry.
2. If the front panel or the TFT monitor is squalid, please use a clean silicone cloth and neutral detergent to
wipe off the spot. Using a rough cloth and non-neutral detergent such as alcohol for cleaning may result in
scratching or decoloration to the applicant.
3. If any abnormal behavior of the unit is found, please refer to trouble shooting guide of this manual. If no
relevant information is found , please press the [RESET] key on the front panel to resume factory default.
4. If you have parked the car in hot or cold weather for a long time, please wait until the temperature in the
car becomes normal before operating the unit.
5. Using in-car heater in low temperature environment may result in beads coagulate inside the unit, DO
NOT use the unit in this situation, eject the disc and wipe off the bead on the disc. If the unit still doesn
6. No fi erce impact to the LCD monitor when it is in open position for preventing the damage to any mecha-
nisms inside.
7. To prevent the damage to the screen, avoid touching it with sharp objects.
8. The monitor employs auto motorizing mechanism, please do
9. To provide a clear demonstration and an alternative for easy understanding to the operation of this unit,
graphic illustrations are used. However, these illustrations are some different from the actual images dis-
played in the unit.
10. During operation the unit,"
"is displayed if the particular operation is not available or illegal.
11. Operate the unit correctly according to this manual to prevent. Unnecessary problem. The guarantee
won''t be valid if the problem is caused by inappropriate operation.
Before installation and operating the unit please read
this manual thoroughly and retain
it for future reference
27