KOOMANDO R5102 Manuel D'instructions page 2

Masquer les pouces

page de 5

/ 5
Signets

Les langues disponibles

Receiver R5102 - R5129

Instruction Manual

2 3 4 5

TECHNICAL SPECIFICATIONS

Frequency: 433,92 Mhz

Number of channels: 1 configurable - mono or bistable

Encoding type: rolling code

Storable remote controls: 30

Installation: indoor

Supply: 12/24V ac/dc

Relè: 1A - 30Vdc

Size: mm.59x34x20

Weight: 32 gr

REMOTE CONTROL PROGRAMMING

Press the memo button on the receiver, the LED lights up orange, press the desired button on the radio control twice, the LED flashes first once then

times to indicate that the learning has taken place.

Repeat the same operation for all the remote controls you need.

DISTANCE STORAGE FOR NEW REMOTE CONTROLS

1. Press keys 1 and 2 of an already memorized remote control simultaneously for 1 second, release and immediately press key 2. The operation must

be performed very quickly.

2. On the new remote control, press the button to be memorized for 1 second, then press the same button again and release.

MEMORY CANCELLATION

Press and hold the memo button on the receiver for about 8 sec., Release the button. The LED lights up orange and then turns green again.

The memory is deleted.

BISTABLE FUNCTION

Remove the top cover, then open the container by prying between the two parts starting from a corner.

The jumper in position J2 on the receiver is normally in a monostable position. Moving the switch the output it will work in bistable mode (at the first

press of the radio control the relay is energized, at the second it is de-energized).

ADDITIONAL REMOTE CONTROLS AND ACCESSORIES

You can buy other remote controls or accessories on the site www.itelecomandi.com/accessori.html

WARNING!

It is important for safety to follow the following manual. Incorrect installation or incorrect use of the product can lead to serious damage to property and / or people.

Puoi visualizzare o scaricare le istruzioni in Italiano di questo prodotto all'indirizzo: