Advanced Bionics M Zn-Air Mode D'emploi page 10

Inserting Zn-Air Disposable Battery Cells
(Tamperproof Cartridge)
Using the same tool provided for the M T-Mic™ microphone
or M Earhook removal and replacement, insert the pointed
end of the tool into the small hole located on the spine of the
Zn-Air cartridge.
With the tool inserted in the hole, gently push in and
downward until you feel the Zn-Air drawer release and pop
out the button of the Zn-Air cartridge. If you do not have
the tool present, any thin, pointed device should work to
release the drawer.
8