Using The Appliance - Shinco SD0-10D Mode D'emploi

Using the appliance

Warning! Never cover the appliance during operation. This could
lead to heat accumulation or fire and damage to your appliance.
Make sure no water can drop into the appliance.
6 EN
Switch On/Off
Press ON/OFF button (E). The current
humidity level in the room shows in
the display (A).
Mode
Press MODE (G) to switch between
automatic and continuous dehumidi-
fication.
Setting humidity level
Ensure that the appliance is in Auto
mode. Press UP (B) or DOWN (H) to
set the desired humidity level. The
appliance will start to work until the
desired level is reached.
Fan speed
Press WIND (C) to switch between
highly efficient (hi-efficient) and
silent (Silence) fan speed.