Important Notes; Safety Notes; Laser Safety; Transporting And Positioning The Device - Fujitsu LIFEBOOK Bay Projector Mode D'emploi

Important notes

Important notes
In this chapter you will find information regarding safety which it is essential to take note of when
working with your device.

Safety notes

Pay attention to the information provided in the "Safety / Regulations" manual and in the
!
following safety notes.
•
Do not put the notebook on your lap or any other part of your body for a longer period of time.
The bottom of the notebook and of the Bay Projector will get hot. This may lead to burns.
•
Do not touch the air vents or any other hot surface of the Bay Projector while the Bay Projector
is running. This may lead to burns.
•
Do not put items close to the air vents of the Bay Projector or block the air vents while the Bay
Projector is running. The Bay Projector may overheat. Fire hazard!
•
Do not touch the lens of the Bay Projector. The edges of the lens are both hot and sharp, which
can lead to injuries.
•
Do not use the notebook and the Bay Projector in an unstable, wet or dusty environment.
•
Do not touch the connector of the Bay Projector.
•
Avoid shock and vibrations.
•
The laser lens is made of glass. Avoid impact to prevent the lens from breaking.

Laser safety

This device uses a Class 1 laser. It complies with Class 1 of the international laser product standard
IEC 60825-1.
Never look directly into the laser beam.
!
Never point a laser beam at a person, and do not allow children to use this product.

Transporting and positioning the device

•
Prior to extracting or retracting the Bay Projector, put your notebook on a desk or other stable,
even surface.
•
Prior to transporting the notebook, push the Bay Projector back into the bay. Otherwise
vibrations or impact may damage the Bay Projector.
Fujitsu Technology Solutions
English -
7
7