Powermate PM2015 Manuel De L'utilisateur page 15

Operation
(Continued)
• Save all instructions
STOPPING THE ENGINE AND BLADE
WARNING
Wait for the blade to come to a complete stop before
attempting to perform any work on the mower.
1. Release blade control lever to stop the engine and the
blade.
ADJUSTING CUTTING HEIGHT
Reassemble the wheels in the desired wheel height posi-
tion. Refer to the "To assemble the wheels" section in the
assembly portion of the manual
Questions? Call Toll Free at 1-800-737-2112
MOWING TIPS
Thoroughly inspect the area where the mower is to be
used and remove all foreign objects such as rocks, wire,
toys, etc.
WARNING
This mower can throw small objects at high speed causing
personal injury or property damage.
CAUTION
If you strike a foreign object or if the mower starts to vibrate
abnormally, stop the engine. Remove spark plug boot from the
spark plug, thoroughly inspect the mower for any damage, and
repair the damage before restarting and operating the mower.
Vibration is generally a warning of trouble.
For best results:
a) Do not cut wet grass
b) Never cut off more than one-third of the total length of
the grass.
c) Plan ahead and use a mowing path in a counterclock
wise direction that discharges the new grass clippings
away from the remaining area to mow.
d) Adjust your mowing speed to the condition of the lawn.
Do not force mower. It will do the job better, last longer
and with less likelihood of a risk of injury at the rate for
which it was designed.
e) New grass, thick grass or wet grass may require you to
use less than the mower's full advertised cutting width.
f) When mowing very tall grass, adjust the mower height
to its highest setting and make a first cut. Adjust mower
to the desired height for a second cut.
ENG - 15 Copyright © 2016 MAT Engine Technologies, LLC