HOMEDEPOT Hampton Bay BELCOURT GAZEBO Manuel D'emploi page 7

Assembly (continued)
Assembling the oblique
5
beams
Insert the oblique beams (L) into oblique beam
connectors (M). Secure the oblique beam connectors
(M) to the U-shaped assembly using bolts (CC), flat
washer and nuts (DD).
NOTE: To avoid destroying the finish, please handle
it with care.
Attaching the middle beams
7
to the roof connector
Insert the middle beams (J and K) into the big roof
connector (N).
6
Assembling the roof
Insert the oblique beams (L) into the connecting tube of
big roof connector (N). Secure the hook (R) to the big
roof connector (N).
8
Securing the middle beams
Install either middle beams 1 (J) or middle beams 2 (K)
to the U-shaped piece of the straight pipe connectors (S)
using bolts (CC), flat washers (BB) and nuts (DD).
Place the big canopy (U) on the assembled big roof.
Do not unfold it completely.
7
Please contact www.homedepot.ca for further assistance.
1-877-527-0313