Publicité
Les langues disponibles
Les langues disponibles
Model 2606A/2606A-B operations manual
horizontal surface may cause the charger to slightly reduce amperage output due to
the thermal protection built in. Do not install the charger on carpeted, upholstered, or
varnished surfaces.
2. Locate charger as far away from battery as dc cables permit.
3.Never place charger directly above battery being charged; gases from battery will
corrode and damage charger.
4.Never allow battery acid to drip on charger when reading electrolyte specific gravity or
filling battery.
5.Do not operate charger in a closed-in area or restrict ventilation in any way.
6. Do not set a battery on top of charger.
DC ConneCtion PReCAUtions
1.Connect and disconnect dc outputs only after removing ac cord from electric outlet.
Never allow the alligator clip connector to touch each other
2.Check polarity of the battery posts. The POSITIVE (POS., P, +) battery post usually has
a larger diameter than the NEGATIVE (NEG., N, -) post. Connect Red charger output
wire to POSITIVE post, Black charger wire to NEGATIVE.
3. Do not face the battery when making the final connection.
4
Publicité
