User Manual - PNI VP850 Manuel Utilisateur

Warnings
• For a good viewing, we recommend installing the projector in a dark room.
• Handle the projector with care. Do not drop it on the floor or shake
it, as these actions may damage the product or may affect the normal
operation of the product.
• Be careful how you store and use the power cord. Do not deform it or
damage its insulation to avoid short circuit.
• After turning off the projector, it is best to unplug the power cord.
• Before cleaning the projector, unplug it.
• Clean the projector regularly, using a soft cloth slightly soaked in a neutral
detergent or just water.
• To clean the lens, use only special paper and solutions.
• Regularly clean the fan and the speaker of dust deposits using a brush or
compressed air.
• While the projector is working or after you have just turned it off, some
parts of it may be very hot. Be careful how you handle it so as not to
cause burns to yourself.
• While the projector is working, do not look directly into the lens so as not
to injure your eyes.
• Do not disassemble the product or repair it by yourself. In case of
abnormal operation, call a specialized service center.
• Do not spill liquid on the projector to avoid a short circuit.
• Do not cover the projector with other objects to prevent it from
overheating.
• During operation of the video projector, ensure a good ventilation.
Package contents
• Projector
• Remote control
• Power cable
• AV signal cable
• VGA signal cable
• Spare fuse
3

User manual