Checkline VI-D4 Mode D'emploi page 2

2. Constraints
Concrete Moisture Meter VI-D4 does not detect concrete humidity through electricity conducting materials
like metal coverings/linings, PE-rubber or any wet surfaces. Moisture Meter VI-D4 should not be used to
measure concrete humidity on surfaces which are topped with a thick layer of floor covering material like
wood. Meter measurement outcomes show the actual humidity at a time of measurement.
baterry
status
ON/HOLD
button
To turn on the meter press ON/HOLD button.
Use the SET button to select the measuring scale:
1 - Concrete (0-6% H2O)
2 - Cement Screed (0-6% H2O)
3 - Cement Screed (0-4% CM)
4 - Anhydrite Screed (0-3.5% H2O)
5 - Anhydrite Screed (0-1.9% CM)
6 - Caisson 0.3-15.3 Scale (0.3-15.3m)
7 - Relative Scale (0-100%)
8 - Gypsum (0-10%)
Name of chosen scale will appear in the scale indicator field.To see detailed description of each scale go to
Available scales section.
• To set the mode of measurement press ON/HOLD button. There are 2 available modes: Normal, Max
ELECTROMATIC Equipment Co., Inc. dba Checkline 600 Oakland Ave,
scale
ndicator
SET button
Cedarhurst, NY 11516, USA
T: (800) 645-4330 / (516) 295-4300
info@checkline.com, www.checkline.com
spring
electrode
sensor plate