AUTO-HAK J55A Instructions De Montage page 5

Towing hitch accessories:
Towing hitch (without electrical set)
J55A
Cat. no.
Class: A50-X
Designed for:
Manufacturer: HYUNDAI
Model: MATRIX
Type: VAN
produced since 08.2001 till 06.2010
Approval number according to Directive 94/20/EC: e20*94/20*0589*00
This towing hitch is designed according to rules of safety traffic regulations. The
towing hitch is a safety component and can be install only by qualified personnel.
Any alteration or conversion of the towing hitch is prohibited and would lead to
cancellation of design certification. Remove insulating compound and underseal
from vehicle (if present) in the area of the matting surfaces of the towing hitch.
The vehicle manufacturer's specifications regarding trailer load and max. vertical
cup load are decisive for driving whereat values for the towing hitch cannot be
exceeded.
D-value formula:
Max trailer weight [kg] x
Max trailer weight [kg] +
PPUH AUTO-HAK S.J.
Produkcja Zaczepów Kulowych
Henryk i Zbigniew Nejman
76-200 SŁUPSK ul. Słoneczna 16K
tel/fax (059) 8-414-414; 8-414-413
E-mail: office@autohak.com.pl
www.autohak.com.pl
Technical data:
D-value: 7,6 kN
maximum trailer weight: 1300 kg
maximum vertical cup mass: 52 kg
Foreword
Max vehicle weight [kg]
9,81
=
X
1000
Max vehicle weight [kg]
D [kN]