Télécharger Imprimer la page

Klein Tools Video Borescope ET500 Mode D'emploi page 5

Masquer les pouces Voir aussi pour Video Borescope ET500:

Publicité

Les langues disponibles

Les langues disponibles

LCD Screen: 3.2" TFT LCD screen.
1.
Power Button: Press and hold for 3 seconds to turn the instrument on
2.
and off.
Bright Plus Button: Increases the brightness of the camera-mounted
3.
LEDs up to 10. Deletes photos or videos in the fi le explorer mode.
Bright Minus Button: Decreases the brightness of the camera-mounted
4.
LEDs down to 0 (off).
OK Button: Accepts the current selection on screen. Enters menus. Play
5.
and pause in video playback mode.
ESC Button: Returns to live video mode from top level menu. Returns
6.
to submenu from fi le explorer mode.
Left Button: Flips screen 180 degrees in live video mode. Moves left or
7.
up one selection. Moves to the previous video or photo in the list while
viewing a fi le.
Right Button: Flips screen 180 degrees in live video mode. Moves right
8.
or down one selection. Moves to the next video or photo in the list
while viewing a fi le.
Battery Cover: Pulls back to reveal the battery container.
9.
Photo Capture Trigger: Press momentarily to capture a photo in live
10.
preview mode. Increases value in video settings mode and time mode.
Toggles between internal fl ash memory and SD card in memory mode.
11.
Video Capture Trigger: Press and hold for 1 second to begin or end
video capturing in live preview mode. Decreases value in video settings
mode and time mode. Toggles between internal fl ash memory and SD
card in memory mode.
Camera Head: Contains the CMOS sensor and LEDs. The arrow on top
12.
indicates the camera is right-side up.
13.
Gooseneck: Rated to IP67 to withstand all ingress of dust and
submersion in water up to 1 meter. Caution: bending the gooseneck to
90 degrees or greater can permanently damage it.
14.
Camera Output: Attaches to borescope body when the notch is
oriented correctly.
15.
Camera Input Socket: Screw into place once the camera output plug is
inserted.
16.
TV & Headphone Out: Insert a standard 1/8" headphone jack or the
included component video adapter.
17.
SD Card Slot: Insert an SD or SDHC card with 32GB capacity or less to
store more video or photos.
18.
USB & Charging Port: Attach the borescope to a computer via USB to
charge and transfer fi les. Attach to included 5V adapter to charge via a
standard outlet.
19.
Reset Button: Perform a hard reset of the borescope.
FEATURE LAYOUT
5

Publicité

loading