AUTO-HAK E11 Instructions De Montage page 5

Towbar accessories:
Towing hitch (without electrical set)
Cat. no. E11
Class: A50-X
Designed for:
Manufacturer: OPEL
Model: VECTRA (A)
Type: 4 doors, except 4x4
produced since 09.1988 till 08.1995
Approval number according to Directive 94/20/EC: e20*94/20*0047*00
This towbar is designed according to rules of safety traffic regulations. The towing
hitch is a safety component and can be install only by qualified personnel. Any
alteration or conversion of the towing hitch is prohibited and would lead to cancel-
lation of design certification. Remove insulating compound and underseal from
vehicle (if present) in the area of the matting surfaces of the towing hitch.
The vehicle manufacturer's specifications regarding trailer load and max. vertical
cup load are decisive for driving, and values for the towing hitch cannot be excee-
ded.
D-value formula:
Max trailer weight [kg] x
+
Max trailer weight [kg]
PPUH AUTO-HAK S.J.
Produkcja Haków Holowniczych
Henryk & Zbigniew Nejman
76-200 SŁUPSK ul. Słoneczna 16K
tel./fax (059) 8-414-414; 8-414-413
email: office@autohak.com.pl
www. autohak.com.pl
Technical data:
D-value: 8,58 kN
maximum trailer weight: 1700 kg
maximum vertical cup load: 75 kg
Foreword
Max vehicle weight [kg]
9,81
X =
1000
Max vehicle weight [kg]
D [kN]