Watts BB-M101 Guide De Démarrage Rapide page 2

Smart Volumetric Flow Monitor
Model BB-M101
WARNING
!
1. Install the BB-M101 Kit per the installation manual provided with the filtration system.
2. Plug the monitor into 120V supply & follow the set-up wizard to connect BB-M101 to your 2.4GHz Wi-Fi
Network. Ensure that the installation location has strong Wi-Fi signal.
3. Follow the set-up wizard to register your BB-M101.
Steps 2 & 3 are highly recommended and required so you can receive text and email notifications. The flow
monitor can still function if you skip these steps, but the alerts / notifications will be localized or limited on the
device only.
4. Your monitor should now be all set and take you to the Home / Dashboard Screen.
Below is a high-level overview of the Home / Dashboard screen.
Date
Wi-Fi
Status
How would I know if my device gets disconnected from my Home Wi-Fi?
The Wi-Fi Icon on the monitor will show a crossed line to indicate lost connectivity. Notifications will also be
sent on the registered email and mobile number.
What notifications will I receive, and how do I select which notifications to receive?
You should see / receive an alert to replace the filter when the Filter Life Consumed reaches 100%. You can select
additional notifications (email and / or text message) by going to "Menu" g "Setting" g "Notifications" g "Email"
or "SMS" to get notified when the filter usage reaches 50% / 90% / 95% levels or if the Wi-Fi gets disconnected
for any reason.
Water Pressure
0 psi to 125 psi (0 bar to 8.61 bar)
Operating conditions above are for the BB-M101 monitor alone. See document IOM-WQ-BB-S101 for the complete system operating conditions.
This Quick Start Guide is not a substitute for the Installation Manual. Please
refer to the Installation Manual for proper installation. The installation manual
can also be accessed using the QR code. Watts
failure of alerts due to connectivity or power issues. Do not let system freeze.
Time
Flow Icon: Appears when water is
flowing through the system
Filter Life Consumed:
Blue to White : As it moves 0% to 100%
Filter Life Remaining:
Blue to White : As it moves 100% to 0%
Gallons Remaining:
Blue to White : As it moves 84,480 to 0
Menu Icon: Takes you to the Menu Screen
Notification Icon: Appears when there is an unread alert / notification
Temperature
34° F to 125° F (1°C to 52°C)
is not responsible for the
®
Maximum Flow Rate
26.5 GPM (100 LPM)
Volume To Alarm
84480 Gal. (319,791 L)