Maintenance; Correction Of Malfunctions - WAGNER STUDIO SANDER Traduction Du Mode D'emploi Original

GB
11. Working hints for your sander
•
Your sander is useful for working on wood, metal and painted surface. It will smooth
surfaces prior to painting, even where fillers have been used and left proud.
•
Your sander is best suited to large flat areas such as doors but can also be used on skirting
boards, windows, upcycling of furnitures, etc.
•
Different types of sanding paper will allow the sander to meet various needs. The higher
grade number, the finer the grit. For rough work start with a low grade of grit (e.g. 80
grade) and change to a higher, finer grade (e.g. 100 or 120) for finishing. If you use a fine
grade for rough surfaces the sandpaper will soon clog and need changing.
•
The included sanding sheets are suitable for "Upcycling" and "Shabby Chic" projects.
•
At all times, let the sander do the work - do not force it or apply excessive pressure to the
sanding paper or it could wrinkle or tear. Preferably, use a light circular motion.
•
Keep the sanding paper dry, as otherwise the grit may be impaired.

12. Maintenance

Remove the plug from the socket before carrying out any adjustment, servicing or
maintenance.
Your power sander requires no additional lubrication or maintenance. There are no user
serviceable parts in your power sander. NEVER use water or chemical cleaners to clean
your power sander. Wipe clean with a dry cloth. Always store your power sander in a dry
place. Keep the motor ventilation slots clean. Keep all working controls free of dust. If the
supply cord is damaged do not use the sander.

13. Correction of Malfunctions

Problem
Sander does not
work
Sander does
not abrade the
surface
Sander does not
move smoothly
18
Cause
•
Sander not connected to mains
supply
•
Plug fuse open-circuit (only UK)
•
Sanding paper worn
•
Sanding paper loose, damaged or
wrinkled
Studio Sander
Remedy
➞ Plug in mains cord
➞ Replace with a 5A fuse
➞ Replace
➞ Replace