Special Hazards; Labelling / Safety Marks - WIKA 532.51.100 Mode D'emploi

2. Safety

2.4 Special hazards

WARNING!
Observe the information given in the applicable type examination
certificate and the relevant country-specific regulations for
installation and use in hazardous areas (e.g. IEC 60079-14, NEC,
CEC). Non-observance can result in serious injury and/or damage
to the equipment.
WARNING!
For hazardous media such as oxygen, acetylene, flammable or
toxic gases or liquids, and refrigeration plants, compressors, etc.,
in addition to all standard regulations, the appropriate existing
codes or regulations must also be followed.
WARNING!
Residual media in dismounted measuring instruments can result in
a risk to persons, the environment and equipment.
Take sufficient precautionary measures.

2.5 Labelling / safety marks

Product label
Explanation of symbols
CE, Communauté Européenne
Instruments bearing this mark comply with the relevant European
directives.
ATEX European Explosion Protection Directive
(Atmosphère = AT, explosible = EX)
Instruments bearing this mark comply with the requirements of
the European directive 94/9/EC (ATEX) on explosion protection.
WIKA operating instructions pressure gauge model 5 per ATEX
Before mounting and commissioning the pressure
gauge, ensure you read the operating instructions!
Date of
manufacture
GB
7