Edge G001WT Mode D'emploi

E
Light Alarm Clock
LCD Screen Display
Luminous Surface
Reset (press for 3 seconds)
Micro USB Charging Port
3
Display Icons Introductions
Time icon displays when accessed to the time setting menu
Snooze icon displays when the clock is in snooze status
Alarm 1 icon displays when alarm 1 is turned on
Alarm 2 icon displays when alarm 2 is turned on
Battery life icon stays on permanently to show the current
battery life
Light icon displays when the light function is turned on
PM/AM AM or PM icon shows when the clock is at 12 hours format
5
D E TM
G
Operating Buttons
USB Charging Cable
ENGLISH
Thank you for purchasing the Gingko Edge Light Alarm Clock.
To achieve the best performance of this product, please read
this Instruction Manual carefully before use and keep it safe for
future reference.
Safety and Product Care Instructions
1. Do Not disassemble or modify this product without manufacturer's
permission.
2. Do not place this product in an environment with strong humidity or
high temperature, such as a steam room or by a fire place; the
product can work perfectly fine in the bathroom.
3. Any heavy drop from high place could damage this product,
please handle with care and place it at a safe and stable table/desk.
4. The charging plug adapter is not included; please charge this
product via any USB charger such as a phone charger or any USB
port, as long as the output is not more than 5V.
5. You may press the RESET button to put the clock back to default
setting when it's required.
6. Please email to support@ging-ko.co.uk if you have any further
inquiries about how to use this product.
Product Screen Introductions
Time On-Screen Display
Time Setting Button
AM, PM Screen Icon
Snooze Screen Icon
Down Button
Alarm 1 Screen Icon
Alarm 1 Setting Button
Setting Buttons Introductions
Press and hold down until a beep to access to the time setting mode
and the time icon on the screen will display; quick double-clicks on
this button to switch between 12 and 24 hours display format
Single click to scroll the numbers up or down when accessed to the
time setting mode, adjust the ambient light when it is flipped over for
lighting mode use or adjust the screen light intensity when it's in clock
mode use (the screen light automatically turns on only from 9pm till
7am and can only be adjusted during that time period)
Single click to view the current alarm time set for alarm 1, double
clicks to turn on or turn off alarm 1; press and hold down until a beep
to access the alarm 1 setting mode; when alarm 1 is turned on, the
alarm 1 icon will display on the screen
Single click to view the current alarm time set for alarm 2, double
clicks to turn on or turn off alarm 2; press and hold down until a beep
to access the alarm 2 setting mode; when alarm 2 is turned on, the
alarm 2 icon will display on the screen
A quick double-click until a beep to turn on or turn off the light
function; when it's turned off, the light won't turn on the clock is
flipped over; when it's turned on, the lighting icon will display on the
screen
2
Light Setting Button
Light Screen Icon
Battery Life
Screen Icon
Up
Alarm 2 Screen Icon
Alarm 2 Setting Button
4
6