Indication For Use; General Warnings - Cuda surgical NEURO Manuel D'utilisation Et D'entretien

1. INDICATION FOR USE

Congratulations on the purchase of your new CUDA ® NEURO Headlight system.
This fiberoptic headlamp system is designed to deliver illumination from a high
intensity lightsource for surgical site illumination. This Operator Manual will help you
to install the device and optimally integrate it with other components of your system.
Also, it will instruct you on how to make adjustments, cleaning, maintenance and
service guidelines as well as recommendations for best performance results.

2. GENERAL WARNINGS

The user of this product should be thoroughly familiar with the use and care of
•
this product.
The user should carefully study the manual before making any attempt to use this
•
product clinically.
Follow the instruction in the operating manual of other manufacturer's equipment
•
when used with this product.
Before each procedure, carefully inspect the fiberoptic cable to ensure the proper
•
maintenance and sterilization (when recommended).
Lightsources using high intensity lamps will produce heat as well as light. The high
•
output of such systems can cause burns.
Use care not to point the light directly at the eyes during operation; the brilliant
•
light can cause severe eye discomfort.
FIRE HAZARD: DO NOT DRAPE OR COVER THE LIGHTSOURCE OR THE
FIBEROPTIC CABLE WHILE IT IS OPERATING. DO NOT PLACE THE FIBEROPTIC
CABLE END ON THE DRAPES WHILE IT IS OPERATING.
CAUTION: The metal end fittings of the fiberoptic cable get hot during operation.
Allow to cool outside the lightsource for at least five minutes before touching.
LIT118 CUDA
®
(English)
NEURO
Rev. F
Page 3 of 42