Miele S 2001 Mode D'emploi page 11

Using the Powerbrush
Observe the cleaning instructions of
the floor manufacturer.
The Powerbrush is particularly suitable
for cleaning and restoring crushed
carpet pile of wall to wall carpeting and
floor coverings subject to hard wear,
especially in high traffic areas.
The Powerbrush can also be used on
smooth floor surfaces.
Do not use the powerbrush on:
– (SEB 217-3 only) Floors with a
variable or uneven surface. The
brush could come into contact with
the floor and cause damage.
– High quality, hand knotted rugs, for
example Berber or Persian rugs, as
well as extremely long piled area
rugs and carpets. There is a danger
of the threads being pulled out. Turn
the Powerbrush off to vacuum these
types of floor coverings and use only
suction.
Connecting the Powerbrush to
the Electro Telescopic wand
^ Insert a the Electro Telescopic wand
into the Powerbrush until it clicks into
place.
^ To release the parts, press the lock
release button and pull the wand up
and out b..
For more information on use and care
please refer to the instructions supplied
with the Powerbrush.
Before using the vacuum cleaner
11