Ramiaudio PMI103 Manuel Utilisateur page 13

WIRING
Wiring with one PMI103
0
V+
S/ N :
DC supply
24V (200mA)
P.Supply
DC 24V
Direct console output
Wiring with two PMI103
0
V+
S/ N :
DC supply
24V (200mA)
P.Supply
DC 24V
Direct console output
Accessories: RJ45 audio adapters
XRJ102M : Adapter Cable: RJ45 Female to two "XLR Male"
§
XRJ102F : Adapter Cable: RJ45 Female to two "XLR Female"
§
Designed for use with the international standard, these adapters
offer excellent signal transmission and reliability over time.
The length of each adapter is 20cm.
Rami
Made in France
AUX OUT IN
RJ45
or with adapter
PMI103 A
Made in France
AUX OUT IN
RJ45
or with adapter
P.Supply
DC 24V
PMI103 B
V+
S/ N :
Made in France
DC supply
AUX OUT IN
24V (200mA)
The PMI103 B is supplied with 24V by the RJ45 cable
to the PMI103 A .
This wiring allows two mic modulations (at line level)
to be transmitted through the RJ45 cable to the
console.
Attention : If PMI103 A is assigned to the left channel,
PMI103 B must be assigned to the right channel.
NEVER AFFECT both PMIs on the same channel.
13
V+
S/ N :
Made in France
DC supply
AUX OUT IN
24V (200mA)
Wiring with balanced
Jack 6.35 output
To Console
XRJ102M
suite
XRJ102F
PMI103