Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

FRONT PANEL

1 - XLR balanced microphone input socket with phantom power. Adjustment of the sensitivity by A
on the rear panel.
2 - Peak LEDs of the microphone input.
3 - Fugitive switch "ON / OFF". An internal flip flop D memorizes the action, the reset is done by
pressing it again. It allows:
 To mute the sending of the microphone line output in the OFF position .
 Sending the microphone line output and mute the stereo monitor out in the ON position (to
avoid feedback with microphone.)
4 - Potentiometer for adjusting the balance between the monitor input and the microphone
modulation.( only for the headphone control )
5 - Potentiometer for adjusting the headphone volume.
6 - Stereo headphone output socket.
7 - Backlit plexiglass for ON AIR visualization
8 - Potentiometer for adjusting the output microphone volume.
9 - Potentiometer for adjusting the bass. The middle position of this potentiometer is neutral.
10 -Potentiometer for adjusting the treble . The middle position of this potentiometer is neutral.
Rami
PUSH
1
MIC
2
PEAK
3
ON / OFF

BAL
MIC
VOL
PHONES
0
10
ON AIR
VOL
0
10
MIC
9
10
12
4
IN
L / R
5
6
7
8
PRT110

Publicité

Table des Matières
loading

Table des Matières