Polarlite Fun Mode D'emploi page 4

Hanging/Setting up
The snap hook (6) is not intended for
climbing. Use it only to hang the product.
• The product can be hung using the snap hook: Place
the product on its head and remove the snap hook from
its retainer on the bottom of the battery compartment
lid. Slide the snap hook along the guide to the middle
(see illustration at right). You should feel and hear the
snap hook click into place.
• To set up the product, carefully slide the snap hook
back to its original position and push it into the retainer.
Place the product on a horizontal, stable surface.
Using the camping lantern
• Press and hold the on/off button until the light turns on in bright lighting mode. The battery
indicator lights up for a few seconds to show the battery charge state.
• Repeatedly and quickly press the on/off switch (within 2 seconds) to switch between the
product's modes: Bright lighting mode > dimmed lighting mode > flicker mode
• Wait for longer than 2 seconds and press the on/off button again. The light goes out.
Cleaning and care
• Never submerge the product in water.
• Remove the batteries before cleaning.
• Under no circumstances use aggressive cleanings agents, cleaning alcohol or other chemical
solutions since these can penetrate the housing or impair functionality.
• Use a dry, soft cloth for cleaning the product.
Disposal
a) Product
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product in accordance
with applicable regulatory guidelines.
Remove any inserted batteries and dispose of them separately from the product.
b) Batteries
You as the end user are required by law (Battery Ordinance) to return all used
batteries. Disposing of them in the household waste is prohibited.
Contaminated batteries are labeled with this symbol to indicate that disposal in the
domestic waste is forbidden. The designations for the heavy metals involved are: Cd
= Cadmium, Hg = Mercury, Pb = Lead (name on batteries, e.g. below the trash icon
on the left).
Used batteries can be returned to collection points in your municipality, our stores or wherever
batteries are sold.
You thus fulfill your statutory obligations and contribute to the protection of the environment.
Technical data
Power supply ................................ 4 x 1.5 V batteries, type AAA
Power consumption ...................... max. 3 W
Operating time .............................. 8 hours in bright lighting mode
40 hours in dimmed lighting mode
110 hours in flicker mode
Illuminant ...................................... 1 LED (non-replaceable)
Light color ..................................... warm-white
Luminous flux ............................... 150 lm in bright lighting mode
30 lm in dimmed lighting mode
Protection type .............................. IPx4
Operating conditions ..................... -10 to +80 °C, 30 - 85 % relative humidity
Storage conditions ........................ -10 to +40 °C, 30 - 85 % relative humidity
Dimensions (ø x H) ....................... 6.6 x 12 cm
Weight .......................................... 160 g
Distributed by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau
These operating instructions are published by CEI Conrad Electronic International (HK) Limited, 18th Floor, Tower 2,
Nina Tower, No. 8 Yeung Uk Road, Tsuen Wan, New Territories, Hong Kong. All rights including translation reserved.
Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing systems require
the prior written approval by the editor. Reprinting, also in part, is prohibited. The operating instructions reflect the current
technical specifications at time of print.
© Copyright 2016 by CEI Conrad Electronic International (HK) Limited *1499880_V1_1216_02_LS_m_en