Netum NT-LP110A Guide De Démarrage Rapide page 4

1)Use the power switch to off the power. If unplug the pow-- print data will be lost.
2)Please use the native power, otherwise it will reduce the working life and be
damaged
3)When the printer is shutdown, if you need to reboot, please wait more than 5S.
Otherwise, the power will be damaged easily.
4)As the power is off, the operation panel power lamps to be over 2-3 seconds after
exterminate. This is normal, not a fault
3. Prepare before using
3.1 Connect the power cable.
3.2 Connect the USB cable
3.3 Turn on the power
The printer's power switch to the 1 state
3.4. Installing drivers
Use download from the of�icial website,
and follow the prompts to install the driver
gradually.
As seeing the following:
(1)