Publicité
Les langues disponibles
Les langues disponibles
GB
Operation Guidelines
1. Opening the lid correctly
First rotate the uncovering knob to the uncovering position,
and then press the uncovering button, the lid opening
automatically.
(In hot-state lid opening, it is normal for the uncovering
speed to be extended due to the influence of difference
between inner and outer pressures of product )
2. Check the exhaust port and block proof cover
Check the exhaust port and block proof cover are clean, if
dirty should be cleaned immediately.
3. Put food in the inner pot
Remove the inner pot, put food and water into the inner pot,
with the total amount of food and water not exceeding the
Max line of the water level line of the inner pot, wipe clean
the outer surface of the inner pot, heating plate surface and
outer pot surface, and then replace the inner pot into the
cooker.
15
4. Close the lid correctly
Close the lid, rotate the uncovering knob to the closing
position; ensure to screw into place, otherwise it cannot work
properly.
5. Switch on
Power on, close the lid in place, with music tips, the display
showing "---",
labels flashing, indicating that the electric pressure cooker
enters into standby state.
and
GB
16
Publicité
