Confi Guring The Wt-1 - Nikon WT-1 Mode D'emploi

Confi guring the WT-1
Before adjusting network settings as shown below,
select Off in the Wireless LAN > Transceiver menu.
Wireless
Communication mode
Encryption
Channel
1
Same SS-ID must be assigned to wireless LAN adapter.
TCP/IP
IP address
Gateway
1 In this example, it is assumed that network uses class C private IP addresses and sub-
net masks. Be sure that IP address is not same as that assigned to ftp server or wireless
LAN adapter. For example, if ftp server is 192.168.1.3, wireless LAN adapter can be
assigned 192.168.1.1, and WT-1 can be assigned 192.168.1.2. All addresses must be
in same class.
30
Infrastructure
SSID 1 D2H
Disabled
—
1 Obtain IP address automatically: Off
IP address: 192.168.1.2
Subnet mask: 255.255.255.000
Disabled
DNS Disabled
SET UP
Wireless LAN
Transceiver
OK
OFF Off
ON
On