Bryton Cardio 35 Mode D'emploi page 5

5. Enter your max heart rate.
6. Go outdoors to acquire GPS signal. Once the GPS signal is fixed,
Cardio 35 automatically sets the date and time. To manually set
the date and time, refer to Time settings (see page 8).
7. Press button 2 to complete setup.
Note: If you want to change your profile, please connect your device to
Brytonsport.com and change the setting via My Device -> Manage Device Data.
Or go to Settings > Others > Profile and change your settings.
Step 4. Start a training or exercise
Cardio 35 operates in three major modes:
Clock View
1
Training
3
2
Note: During pairing process (with heart
rate monitor/foot pod/cadence sensor/
speed sensor), the LED indicators (on the
top of the icons) will blink. When the sensors
are successfully linked to the device, the LED
indicators will light on.
Activity type
(Bike or Run)
Exercise
5