Ergon BE2 Enduro Instructions D'emploi page 16

17
EN
Helmet Carrying
The adjustable helmet holder allows a full-face helmet to be
carried (Fig. 2a), or a standard bicycle helmet (Fig. 3b). To do
this, remove the belt and guide it through the openings in the
helmet (Fig. 2b/3b). Then place the helmet on the backpack
(Fig. 2a/3a) and fasten the belt to the proper loops in
accordance with the numbering printed on them (Fig. 1).
1 2
3
Fig. 1
Carrying arm / leg protectors
Arm / Leg protectors can be carried using the vertical straps
on the underside of the backpack. To do this, open the lowest
outer pocket and pull out the two carrying belts as far as
possible (Fig. 1). Place the protectors at the lower end of the
Fig. 1
4
Fig. 2
Fig. 2a
Fig. 3a
backpack (Fig. 2) and then fasten the carrying belt to the
corresponding loops (Fig. 3).
Fig. 3
1 2
3 4
Fig. 2b
1 2
3 4
Fig. 3b