Publicité
Les langues disponibles
Les langues disponibles
Safety Warning
1.0
Do not install the camera near electric or magnetic fields.
Install the camera away from radio transmitter, electric motors, audio speakers because the magnetic
fields generate from above devices will distort the video image.
Do not install the camera in the high temperature environment.
2.0
Install the camera away from stoves, or other heat generating devices as the high temperature could
cause deformation, discoloration or other damages of the camera.
3.0
Never face the camera toward the sun.
Never face the camera at the sun or other extremely bright objects whether it is in use or not.
4.0
Cleaning
Do not touch the surface of CCD sensor with hands directly. Use a soft cloth to remove the dirt from the
camera body. Use lens tissue or a cotton tipped applicator to clean the CCD sensor and the camera
lens.
Specification
Main Features :
- Colour CDD 1/3" with 420 TV lines
- 12Volts power suppli
- PAL video signal
Micro Camera Specification-Analog Signals Series
VC-05 Analog Camera:
SPECIFICATION
CONNECT MODE
OUTPUT SIGNALS
PIXELS
TV LINES
IMAGE SENSOR
IMAGE DEFINITON
WHITE BALANCE
SNR
DYNAMIC RANGE
WORKING VOLTAGE
CONSUMPTION
WORKING TEMPERATURE
Installation Instructions
Put the speciment on focus , then put off the eyepiece from your microscope and put on the camera, use the
30mm black ring if the hole is bigger than the nosepiece of your camera.
Connect the power supply cable and the TV cable, then turn on the TV and the camera.
DIRECTLY PUT INTO EYEPIECE TUBE
VIDEO SIGNAL
370K PIXELS
420 TV LINES
1/3"SENSOR
628(H)×586(V)-PAL
510(H)×496(V)-NTSC
AUTO
≥48DB
≥56DB
DC 12V
≤85 MA
-10 – 50°C
Page 2
Publicité
