Publicité
Les langues disponibles
Les langues disponibles
Terminal Protective Housing AC-2126
Instruction
ii
Cable entries
Mounted side A
Mounted side B
Enclosed
Material
Sealing
Accessories
AC-215 Series terminals
The protective housing can be extended with the terminals AC-215. Instead of the oscillator the ter-
minals are mounted on the DIN rail and secured with the enclosed holders.
Assembly
Mount housing
Do not attach to vibrating parts of the machine
Observe temperature at place of installation (radiant heat)
Observe the mounting instructions for non-contacting displacement sensors.
1.
Mount the oscillator on the DIN rail and secure it with the enclosed holders.
2.
Steel protective hose: If the cables are laid in steel protective conduit the heavy-gauge conduit
threads have to be removed and be replaced by adequate cable glands threads for steel pro-
tective conduit. Entries that have not been used must be blanked off by means of the appro-
priate blanking plugs.
3.
When closing the fitting take care of the tightness of the seal lip.
Figure 1
Connecting the cable screen to the conduit fitting
AC-2126def V02 15.4.2014 Subject to change without prior notice C105007001
3x M16x1,5 mm for cable 6-10 mm
1x M25x1,5 mm for cable 14-18 mm
3x M16x1,5 mm for cable 3-7 mm
5x M16x1,5 mm Blind fitting
1x M25x1,5 mm Blind fitting
Brass nickle-plated
Perbunan
1
2
3
1. Cable
4
2. Compression nut
3. Clamping insert
5
4. Inner sealing ring
5. Cable shield
6
6. Intermediate adapter
EN
2
Publicité
