Publicité
Les langues disponibles
Les langues disponibles
Controller BT
ENG
"CONTROLLER BT"
(Low voltage control unit for shutter gearmotors)
INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS
WARNING
Read the operating instructions carefully before proceeding with the installation of the control
unit, following the instructions contained herein meticulously. Incorrect installation of
the unit may result in serious risks. The manufacturer declines all responsibility in the event of incorrect
installation or improper use of the product.
SUMMARY
1. PRODUCT DESCRIPTION
2. TECHNICAL FEATURES
3. TERMINAL CONNECTIONS
4. WIRING DIAGRAM
5. DECLARATION OF CONFORMITY
PRODUCT DESCRIPTION
The "CONTROLLER BT" control unit is a low voltage remote inverter for roll-up shutter gearmotors.
TECHNICAL FEATURES
-
Power: 230V~50-60Hz;
- L.V. 24V commands: Open-Common-Close;
- Motor output: 230V~1000W Max;
- Working temperature: -20°÷85°C;
- Box dimensions 100x100x50;
- ABS V-0 container (IP55);
- Extractable terminal boards with two input
TERMINAL CONNECTIONS
1: 230V~ Input
3: 230V~ Input
5: Motor output - Close
7: Motor output - Common
9: Motor output - Open
10: Button1 input
L.V. Open
11: Button1 input
L.V. Common
12: Button1 input
L.V. Close
13: Button2 input
L.V. Open
14: Button2 input
L.V. Common
15: Button2 input
L.V. Close
DECLARATION OF CONFORMITY
The manufacturer hereby declares that the "CONTROLLER BT" control unit conforms to directive 99/05 and
that the following standards have been applied:
ELECTRICAL SAFETY ELECTROMAGNETIC COMPATIBILITY EN 60335-1 EN 50081-1 EN 50082-1
positions.
WIRING
https://appceso.com
DIAGRAM
3
Publicité
