Sonos ZonePlayer 90 Guide Des Produits page 14

2
Where to Begin
New to Sonos?
It takes just a few steps to get your Sonos Multi-Room Music System up and running
(the steps below are fully explained on the Quick Setup Instructions poster packaged
with your ZonePlayer) —
1
Connect a ZonePlayer or a ZoneBridge (purchased separately) to your
broadband router using an Ethernet cable (supplied).
2
Place other ZonePlayer(s) in the room(s) of your choice.
Install the software and follow the prompts to add the ZonePlayer(s) and set
3
up access to your music files.
Add the Controller to your music system.
See page 4 to make sure your home network is ready for Sonos, and then pick up the
Quick Setup Instructions to follow the installation instructions. Once you've set up your
music system, you can add additional Sonos components any time.
Adding to an existing Sonos system?
The Sonos Multi-Room Music System can be easily expanded room by room. If you
are adding this ZonePlayer to an existing Sonos system, you can turn directly to page
5.
Sonos ZonePlayer 90