Publicité
Les langues disponibles
Les langues disponibles
TM 1915
Never locate a Fan where it may fall into a bathtub or
other water container.
• Do not use Fan outdoors.
• Power plug must be removed from the power socket
before cleaning, servicing, maintenance and moving from
one location to another.
OPERATION
1. Carefully remove the Fan from the bag and the carton.
2. Place the Fan on a firm, level surface.
WARNING: Plastic or rubber tabs, like the feet on this unit,
may stick to furniture surfaces and/or hardwood floors. The
unit may leave a residue that could darken, stain or leave
permanent blemishes on the finish of certain furniture
surfaces, including wood surfaces, and/or hardwood floors.
3. Plug the cord set into a 220-240 V-50Hz electical oulet. Be
sure plug fits tightly in outlet.
4. Turn the Fan ON by selecting the desired speed with the
Power Knob on the back of the Fan. (Figure 1)
0-Off
2-High
1-Low
5. To adjust the vertical angle, move the Fan body forward or
backward to the desired position. (Figure 2)
6. To turn the Fan OFF, turn the Power Knob to OFF (0) and
unplug the unit from the electrical unit.
MAINTENANCE
WARNING: ALWAYS UNPLUG THE CORD BEFORE MOVING OR SERVICING.
WARNING: DO NOT IMMERSE FAN IN WATER!
CLEANING: Clean the Fan intake and exhaust openings with the vacuum brush attachment on your vacuum
cleaner..
This will remove dirt ang lint that may accumulate over time. DO NOT ATTEMPT TO TAKE APART FAN. Clean
the body of the Fan with a soft cloth.
CAUTION: Do not use gasoline, benzine, thinner, harsh cleaners, etc. as they may damage the Fan. NEVER use
ALCOHOL OR SOLVENTS.
STORAGE: Store the Fan, with these instructions, in the original carton in a cool, dry place.
8
Publicité
