Storage; Display Error Codes - Haverland DES19 Mode D'emploi

Storage

If the dehumidi er will not be used for a long period of time, follow these steps:
1- Remove the plug from the socket and empty the water tank. Leave to dry the water tank and
dehumidi er, please note that this may take a couple of days.
2- Clean the air lter .
3- Check that the dehumidi er is in perfect condition to ensure a safe use of it after a long period of
storage.
4- Pack the appliance
5- Store the dehumidi er in a dust-free area and out of direct sunlight location, preferably covered
with a sheet of plastic.

Display Error Codes

Please contact local distributor if any of the error codes below appears.
Display Code
Error
Display
What is happening
E1
Temperature sensor error
Flash every 30 seconds
Device still dehumidi es but is
in defrost mode only.
E2
Humidity sensor error
Flash every 30 seconds
Device still dehumidi es but is
in continuous dehumidifying
mode only.