Remote; Getting Started; Usage; Time Settings - Audizio Prato Mode D'emploi

REMOTE

1. Standby
2. Number keys
3. Repeat
4. EQ-button
5. Prev.-button
6. X-Bass
7. FM Mono/Stereo
8. DAB/FM
9. CD/USB
10. DAB/FM Info
11. DAB/FM Scan
12. Display/Pairing
13. Stop
14. CD tray open / close
15. Memory
16. Time / Clock
17. Sleep timer
18. Random
19. Preset up
20. Next track
21. Enter
22. Folder
23. Preset down
24. Mute
25. BT/AUX
26. Volume up
27. DAB/FM Menu
28. Volume down
29. Play/Pause
Note: A type CR2025 battery is already installed in the remote control. Before use, remove the insulation sheet from the
battery as shown below.

GETTING STARTED

1. Unpack the digital radio and remove all packing materials.
2.Completely unwind the power cord and plug it into the wall outlet.
3. Pull out the antenna completely.

USAGE

1. Press the [POWER]-button on the remote control or directly on the radio to turn on the unit.
2. Turn the [VOLUME]-knob on the radio or use the remote control volume buttons for the desired sound level.
Note:
1. If the digital radio is not used for 15 minutes, it will automatically enter into standby mode.
2. AUX mode is used for more than 4 hours, the unit will switch to standby mode.
15 minutes before entering standby mode. you will be notified with "AUTO-OFF" flashing on the display. To extend the AUX
mode you can press RANDOM button."

TIME SETTINGS

Manual time setting
1. In standby mode, press the [TIMER/CLOCK]-button on the remote control.
2. Set the hour with the [
3. Set the minutes using the [
Note: Set the time manually if you are not receiving DAB+ signal. As soon as the radio receives DAB+ signal, the time will be
set automatically.
] or [ ]-button. Press the [TIMER/CLOCK] button to confirm the hour.
] or [ ]-button. Press the [TIMER/CLOCK] button to confirm.
8