Preface
The Juniper Networks NetScreen-5000 Series consists of purpose-built, high-performance
security systems that provide IPSec VPN and firewall services for large-scale carrier,
enterprise, and data-center networks. Built around NetScreen's third-generation ASIC
technology and distributed system architecture, the NetScreen-5000 Series offers
excellent scalability and flexibility.
The NetScreen-5000 Series includes the following device models:
•
The NetScreen-5200, a chassis-based, two-slot network security device.
•
The NetScreen-5400, a chassis-based, four-slot network security device.
NetScreen-5000 Series architecture features multiple processing modules. These include
a management module that provides overall system control, and security processing
modules that allow a variety of port configurations. Together, these modules provide a
wide range of performance and security gateway configurations. Because the modules can
work in many combinations, you can customize the NetScreen-5000 Series to
accommodate the specific requirements of your organization.
The NetScreen-5000 Series also employs a switch fabric for data exchange and a separate
multi-bus channel for control information, thus delivering scalable performance for the
most demanding environments.
G
O
UIDE
RGANIZATION
This manual has four chapters and two appendices.
Chapter 1,
Overview
Ethernet (FE) and mini-GBIC connectors, power supplies, and fan tray.
Chapter 2,
Installing the Device
connect the power supplies, and connect the modules to the network in addition to
providing desktop site requirements and guidelines for rack mounting.
Chapter 3,
Configuring the Device
one of the modules and how to aggregate ports on one of the modules.
Chapter 4,
Servicing the Device
power supplies.
Appendix A,
Specifications
NetScreen-5000 Series, the modules, and power supplies.
Appendix B,
Port Descriptions and LED Status
behavior.
NetScreen-5000 Series
provides a detailed overview of the system, its modules, Fast
details how to rack mount the NetScreen-5000 Series,
details how to obtain an IP address for an interface on
provides procedures on how to replace your module and
provides a list of physical specifications about the
provides descriptions of port and LED
1