Trevi T-Fit 250 GPS Mode D'emploi page 12

Getting started
I. Operation mode
1.Click:Interface switchover
2.Long press:Ok/exit,switchover mode
3.See the schematic diagram below for effective touch area:
Touch key
4.Power on:Press the touch area for more than 3 seconds to power it on.
5. Power off:Click the touch area to switch to the power-off interface;
long press to pop up "YES" and "NO";select "
powered off after a long press.The Bluetooth name,version number and
the last 4 digits of the BluetoothID for the bracelet can be viewed on the
power-off interface.
SHUTDOWN
Q66/V3.6
ABCD
Model / Version
Bluetooth ID
Long press
to turn it off
SHUTDOWN
Q66/V3.6
ABCD
10
YES",and it will be