Matco Tools MPTL144DD Instructions De Fonctionnement page 5

MPTL144DD 3/8"
MPTL192DD 1/2"
Operating the Tool
Select the applied torque from the adjustment ring.
There are 17 positions available.
Forward/Reverse Switch
1. How to insert and remove a bit.
To remove a bit from the chuck, hold the "B" ring firmly by one hand and turn
the "A" ring counterclockwise.
To insert a bit into the chuck, hold the "B" ring firmly by one hand and turn
the "A" ring clockwise.
2. Forward/Reverse selection button.
Select the forward or reverse direction of the tool by pushing the switch.
3. High/Low speed selection.
Use "High" for drilling application.
Use "Low" for screwdriver application.
4. Select the applied torque by using the 17 torque positions provided,
selecting the right torque for the application.
5. Drill Model
Make sure the torque ring is positioned
MPTL144DD/MPTL192DD
14.4V DRILL AND DRIVER WITH LED LIGHT
19.2V DRILL AND DRIVER WITH LED LIGHT
High Speed
(For Drill)
for maximum torque.
Select the speed by pushing
the High/Low Speed Regulator
Low Speed
(For Screwdriver)
5
Reverse
Forward
A
Turn
Counterclockwise
Remove the bit
Turn Clockwise
Insert the bit
B
08/30/06