Télécharger Imprimer la page

Peak 2600 Guide D'installation page 2

Publicité

3
INSTALL SEAT AND BACK
INSTALAR ASIENTO Y RESPALDO
INSTALLER LE SIÈGE ET LE DOSSIER
2"× 6"
C
2"× 6"
C
¼ "
C
C
1"× 4" Guard rail
Pasamanos de 1"× 4"
Rampe de 1"× 4"
#10 × 1" (2) Not provided
#10 × 1" (2) No está provisto
#10 × 1" (2) Non inclus
WARNING: Dimension C must not exceed applicable
building codes. Install 1"× 4" guard rail if required by
applicable building codes. Bracket should not be used
above 60 cm / 23.62" from the ground.
ADVERTENCIA: La dimensión C no debe exceder los
códigos aplicables de construcción. Instalar un pasamanos
de 1"× 4", si fuera requerido po los códigos aplicables de
construcción. El soporte no debe ser usado a más de 60 cm
/ 23,62'' del suelo.
ATTENTION: La dimension C ne doit pas excéder la
dimension applicable selon le code du bâtiment. Installer
la rampe de 1"× 4" si nécessaire, selon le code du
bâtiment. Support ne doit pas être utilisé à hauteur de
plus de 60 cm / 23.62'' du sol.
ATTACH HANDRAIL IF REQUIRED
AJUSTE EL PASAMANOS, SI FUERA REQUERIDO
FIXER LA RAMPE SI NÉCESSAIRE
/
"
3
32
#8 × 2½" (6)
2"× 6"
#10 × 1" (8)
/
"
3
32
#8 × 2½" (2)
Neither Peak Innovations Inc. nor any member of the Peak Group of Companies (as
defined at www.peakproducts.com) shall be liable for any loss or damage resulting from
the improper installation or use of this product and in the event that Peak Innovations
Inc. or any member of the Peak Group of Companies is held to be liable for any reason,
such liability is limited to the retail purchase price of this product.
Peak Innovations Inc. is the owner of intellectual property rights used under licence by
the Peak Group of Companies.
Ni Peak Innovations Inc. ni ninguno de los miembros del Peak Group of Companies (según
se define en www.peakproducts.com) será responsable por pérdida o daño alguno que
fuera resultante de la instalación o uso inapropiado de este producto, y en el caso de que
Peak Innovations Inc. o algún miembro del Peak Group of Companies sea hallado
responsable, dicha responsabilidad estará limitada al precio de compra al por menor de
este producto.
Peak Innovations Inc. es el dueño de los derechos de propiedad intelectual usados bajo
licencia del Peak Group of Companies.
Ni Peak Innovations Inc., ni aucune compagnie membre de Peak Group of Companies (tel
que défini au www.peakaproducts.com) ne sera responsable de toute perte ou tout
dommage découlant d'une mauvaise installation ou d'un mauvais usage de ce produit, et
dans le cas où Peak Innovations Inc. ou une compagnie membre de Peak Group of
Companies est tenue responsable pour toute raison, une telle responsabilité est limitée
au prix d'achat au détail de ce produit.
Peak Innovations Inc. est propriétaire des droits de propriété intellectuelle utilisés dans le
cadre de la license par Peak Group of Companies.
CORNER BENCH DETAILS
DETALLES DEL BANCO ESQUINERO
DÉTAILS DU BANC DE COIN
#8 × 2½"
/
"
3
32
77º
77º
Made in China for:
Hecho en China para:
Fabriqué en Chine pour:
The Peak Group of Companies
As defined by:
Según define:
Comme défini par:
www.peakproducts.com
P.O. Box 96060, Richmond BC,
Canada V7A 5J4
© Peak Innovations Inc., 2008

Publicité

loading

Ce manuel est également adapté pour:

26012602