Using The Keypad - RocketFish RF-NBKPD Guide De L'utilisateur

Using the keypad

Setting up the keypad
To Install the batteries:
1 Open the battery cover located on the
bottom of the keypad.
2 Insert the battery to match the correct
positive (+) and negative (-) polarity.
3 Close the battery cover until it clicks
firmly into position.
To connect the receiver to your computer:
1 Remove the USB receiver from the back
of the keypad.
2 Plug the receiver into an available USB
port on your computer.
The indicator LED light flashes once
when the receiver is initially plugged
into your computer.
6
Note: When replacing the battery, use an
alkaline or other heavy-duty NiMH
battery.