Control Panel View; Mounting And Electrical Connection - Ducasa M-59 Instructions De Montage Et De Fonctionnement

10. CONTROL PANEL VIEW:

11. MOUNTING AND ELECTRICAL CONNECTION

1) When mounted, enough space must be left around heater.
2) Make three holes in the wall above the floor (seeing setting sketch A, B, C
position), ensure the diameter is the same as the expanding wall plug, insert
wall plugs into all three holes.
3) Fix two screws in the wall plugs (see sketch, A&B position), keep the tips of
the screws out by 10mm, and attach the machine after ensuring the screws
are strong enough.
4) Fix the bottom screw in the wall plug (as sketch C position)
19