GYS NOMAD POWER 15 Mode D'emploi page 8

Disposal:
• This product should be disposed of at an appropriate recycling
facility. Do not dispose of in domestic waste.
•The battery must be removed from the device before the latter is
discarded.
•The device must absolutely be disconnected from the power supply
network before removing the battery.
OPERATION
Indicators
Lights
Internal battery
capacity for the
device
Indicators flash in turn, whilst charging the device. The number of indicators ON indicates the capacity of the NOMAD POWER internal
battery. All lights are steady if the battery is on hold or the charge is complete.
!
RECHARGE THE NOMAD POWER before first use and after each use.
INTERNAL BATTERY CHARGING
OR
STARTING THE VEHICLE
Emergency start function for petrol or diesel vehicles with a 12V battery.
To start a vehicle, please process as follows:
!
If the NOMAD POWER voltage is inferior to the vehicle voltage, the NOMAD POWER will not operate.
1
8
NOMAD POWER 15
Press the power button
1 flashing 1 steady
0% 25%
1 - Connect mains adaptor to domestic mains.
2 - Connect the other end to the NOMAD POWER 14V/1A to start the charge.
1 - Connect car adaptor to the car cigarette lighter socket.
2 - Connect the other end to the NOMAD POWER 14V/1A to start the charge.
Connect the jumper cable to the NOMAD POWER connector.
to check internal battery level of the NOMAD POWER.
2 steady
50%
3 steady 4 steady
75% 100%
EN