Assembly - Hart HZUV01 Manuel D'utilisation

ASSEMBLY

UNPACKING
This product requires assembly.
Carefully remove the tool and any accessories from the

box. All items listed in the Includes section must be
included at the time of purchase.
WARNING:
Items in this Assembly section are not assembled to
the product by the manufacturer and require customer
installation. Use of a product that may have been
improperly assembled could result in serious personal
injury.
If any parts are damaged or missing, please call

1-800-776-5191 for assistance.
WARNING:
If any parts are damaged or missing do not operate
this product until the parts are replaced. Use of this
product with damaged or missing parts could result in
serious personal injury.
WARNING:
Do not attempt to modify this product or create
accessories or attachments not recommended for use
with this product. Any such alteration or modification
is misuse and could result in a hazardous condition
leading to possible serious personal injury.
OPERATION
WARNING:
Do not allow familiarity with this product to make you
careless. Remember that a careless fraction of a second
is sufficient to inflict serious injury.
WARNING:
Do not use any attachments or accessories not
recommended by the manufacturer of this product. The
use of attachments or accessories not recommended
can result in serious personal injury.
ASSEMBLING THE VACUUM
See Figures 1 - 3, pages 7 and 8.
Unplug the vacuum.

Place the vacuum on a flat surface in the upright position.

Align the holes in the hose clip with the tabs on the back

of the vacuum.
Push the hose clip onto the vacuum and slide down to

secure.
Insert the handle into the extension wand and press down

until it clicks into place.
Push the hose clip onto the vacuum and slide down to

secure.
Slide the extension wand into the opening at the top of

the vacuum until it clicks.
To remove the extension wand:
Push down on the extension wand until it clicks and

disengages from the vacuum.
Pull the extension wand up and out of the vacuum.

To remove the handle:
Press the handle release button.

Pull the handle away from the extension wand.

CAUTION:
Avoid picking up hard, sharp objects with this product,
as they may cause damage.
CAUTION:
With brush roll on, do not allow vacuum to sit in one
location for an extended period of time, as damage to
floor can result.
4 – English