Warning: May Cause Property Damage Or Severe Injury; Warning: Explosion Or Fire; Warning: Electric, May Cause Property Damage, Severe Injury Or Loss Of Life; Warning: Do Not Try To Repair Or Disassemble The Heat Gun Yourself - Homeright 800951 Manuel D'instruction

• WARNING: MAY CAUSE PROPERTY DAMAGE OR
SEVERE INJURY
1. Keep Heat Gun out of the reach of children.
2. Do not touch the nozzle while Heat Gun is on. Severe
burns will result. Wear gloves to protect hands.
3. Keep moveable items secured and steady while
scraping.
4. Make sure Heat Gun is cool before storing.
5. Do not leave the Heat Gun unattended. Turn off and
unplug if you leave the work area.
6. Thermal shock can also shatter glass. Do not apply
heat to glass surfaces that are cooler than 32°F.
•WARNING
Do not touch nozzle
Severe burns will result.

•WARNING: EXPLOSION OR FIRE

This Heat Gun produces air at extremely high
temperatures (as high as 1100°F). Use it with caution to
prevent combustible material from igniting.
1. Keep the Heat Gun in constant motion.
2. Be aware that heat from this tool could ignite
flammable materials in hidden areas such as walls,
ceilings, floors, soffit boards or behind house siding.
Check these areas before applying heat and do not use
if flammable materials are present, or if you are not
sure. The ignition of these materials may not be readily
apparent and could result in property damage and
personal injury.
3. Do not use near surfaces with cracks or near metal
pipes or flashing.
4. Do not use electric tools with flammable
liquids or gases nearby.
5. Do not use near combustible materials such as dry
grass, leaves, and paper, which can scorch and
catch fire.
6. The nozzle becomes very hot. Do not lay the Heat
Gun on flammable surfaces while operating or after
immediately shutting off. Always set on a flat, level
surface so the nozzle tip is directed upwards.
7. Do not use the Heat Gun as a hair dryer.
C800951 DIGITAL TEMPERATURE HEAT GUN
Important Safety Instructions
when working.
• WARNING: ELECTRIC. MAY CAUSE PROPERTY
DAMAGE, SEVERE INJURY OR LOSS OF LIFE
1. Do not disassemble.
2. Do not work in wet areas or expose the Heat Gun to
rain. Do not immerse.
3. To guard against electric shock, do not have bodily
contact with grounded surfaces such as pipes,
ranges, radiators, aluminum ladders or other
grounded devices.
4. Do not carry by the cord. Inspect cord for wear
or damage.
5. Use only UL (CSA for Canada) listed extension cords
rated for outdoor use.
6. If your Heat Gun has a three-prong plug in, do not
remove grounding pin.
In Canada, an outlet adapter for a three-prong plug may
not be used. Use only a grounded outlet with this unit.
• WARNING: DO NOT TRY TO REPAIR OR
DISASSEMBLE THE HEAT GUN YOURSELF
Repairs should be performed by a qualified shop familiar
with this tool, or return it to HomeRight. (See warranty.)
The warranty will be void if any unauthorized person
opens the tool.

• WARNING: PROP 65 WARNING

Handling the coated electrical wires of this product
exposes you to lead, a chemical known to the State of
California to cause birth defects or other reproductive
harm. Wash hands after use.
EXTENSION CORDS
Grounded tools require a three wire extension cord.
Double insulated tools can use either a two or three wire
extension cord. As the distance from the power supply
outlet increases, you must use a heavier gauge extension
cord. Using extension cords with inadequately sized wire
causes a serious drop in voltage, resulting in loss of
power and possible tool damage.
The smaller the gauge number of the wire, the greater the
capacity of the cord. For example: a 14-gauge cord can
carry a higher current than a 16-gauge cord. When using
more than one extension cord to make up the total length,
be sure each cord contains at least the minimum wire size
required. If you are using one extension cord for more
than one tool, add the nameplate amperes and use the
sum to determine the required minimum wire size.
ENGLISH 4