AMIX DAP 40 Manuel Utilisateur page 12

DESCRIPTION
DAP40 is used to send two stereo signals towards five stereo outputs, keeping the higher signal
quality. All outputs are implemented with individual amplifiers to prevent any interaction between
the send signals.
One stereo input routed to five stereo outputs, or two stereo input routed to five stereo outputs,
or one mono input routed to ten mono outputs ...
XLR balanced inputs / Outputs
On each output, one can select input A or input B or mix A+B.
Each output can be switched mono or stereo regardless of other outputs.
Each output provides individual level control.
USES
Dispatching of one or two signals to equipments running different formats.
Broadcast consoles air signal splitter.
Mono or stereo dispatch.
The up to date design and the careful choice of components allows reliability, and makes DAP
a first choice equipment for recording and broadcasting.
Used in night club, DAP 40 can handle two control rooms signals and send them to two rooms in
any possible combination.
DAP 40 is the perfect tool to despatch various signal (level, format) balanced or unbalanced,
mono or stereo, keeping a top quality with high dynamic (+26 dBu input or output), a large
frequency response et an outperforming signal to noise ratio.
ENGLISH 12 Amix - DAP 40