CREE LIGHTING RUL-B Serie Instructions D'installation

When using electrical equipment, basic safety precautions should always be followed including the following:
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
1. DANGER- Risk of shock- Disconnect power before installation.
DANGER – Risque de choc – Couper l'alimentation avant l'installation.
2. This luminaire must be installed in accordance with the NEC or your local electrical code. If you are not familiar with these codes
and requirements, consult a qualified electrician.
Ce produit doit être installé conformément à NEC ou votre code électrique local. Si vous n'êtes pas familier avec ces codes et ces
exigences, veuillez contacter un électricien qualifié.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
TO INSTALL:
1
Refractor Needs To Be
Assembled On To These 2
Brackets.
4
© 2020 Cree Lighting, A company of IDEAL INDUSTRIES. All rights reserved. For informational purposes only. Content
is subject to change. See www.creelighting.com/warranty for warranty and specifications. Cree
registered trademarks of Cree, Inc.
1 of 1
IMPORTANT SAFEGUARDS
2
Luminaire Bracket
Wireform Latches
INSTALLATION
STEP 1:
Verify that the 2 small brackets are already assembled onto the luminaire. See
Figure 1.
STEP 2:
Engage the 2 wireform latches on the refractor with the 2 brackets on the
luminaire. See Figure 2.
STEP 3:
Clamp down the stainless steel latches to secure the refractor. See Figure 3.
STEP 4:
Completely installed refractor. See Figure 4.
® and the Cree logo are
RUL-B Series
LED Rural Utility Luminaire
Refractor Kit
INSTALLATION INSTRUCTIONS
INSTRUCTIONS D'INSTALLATION
3
www.creelighting.com
LPN00847X0002A0_A