Getting Started; Powering Your Headset; Charging; Power On - Coby CVM220 Mode D'emploi

All manuals and user guides at all-guides.com

Getting Started

Powering your headset

Charging

1. Plug the power adapter into the power input jack of
the charging cradle.
2. Place the headset in the cradle. Ensure that the metal
charge contacts of the cradle and the headset touch
each other.
3. Close the cover of the cradle, and then connect the
power adapter to an AC 100-240V wall outlet.
The indicator light will flash red when the headset is
charging. When charging is complete, the indicator light
will turn off.
The headset should be charged completely upon
initial use. A full charge will take approximately 3
hours, or until the indicator light turns off.
When the headset battery level is low and needs
to be charged, the indicator will flash red and the
speaker will emit a beep.

Power on

To turn on the headset, press and hold the MFB key. The
headset will beep and the blue indicator light will flash to
indicate that the headset is powering on. The headset is
now in Standby mode and ready to receive or make calls
when paired with a cellular phone.
www.cobyusa.com Page 5