Publicité
Les langues disponibles
Les langues disponibles
Assembly instruction
front wheel stand MTP23231
ENG
1. Screw the left frame and the movable wheel sup-
port with an M8x25 bolt incl. washer only hand-
tight.
Special feature: The movable wheel support has
two elevations on one side. On this side the small
metal plate is placed under the M8 bolt and scre-
wed to limit the tilting range of the rocker.
2. Mount the frame back with two M8x16 bolts. Use
washers on both sides and screw each with an M8
nut only hand-tight.
3. Mount the right frame the same way as on the left
side with an M8x25 bolt incl. washer.
15"/16"/17"/18"/19"
movable wheel support
plate
M8x25 bolt
washer large
MTP-Racing GmbH
Zornedinger Straße 19 • DE-85614 Kirchseeon OT Buch
mtp-racing.de • info@mtp-racing.de • Tel.: +49 8091 5628500
4. Now the front wheel support can be mounted.
Use four M8x16 bolts, place washers on both
sides of the frame and screw each with an M8 nut
only hand-tight.
Make the adjustment according to the tyre size.
5. Place the front wheel stand flat on the ground and
tighten all bolts crosswise. This ensures the stabi-
lity of the frame and prevents it from wobbling.
We accept no liability for damage due to improper/
incorrect assembly.
front wheel support
left frame
right frame
handle
M8x16 bolt
washer
M8 nut
back frame
2
Publicité
