Technical Specifications; Troubleshooting - Aiwa Prodigy Air 2 Mode D'emploi

Technical specifications

Bluetooth: version 5.0
Supported profiles: HSP, HFP, A2DP, AVRCP
Wireless range: 10m
Earbud capacity: 50mAH each side
Charge case capacity: 600mAH
Driver: 6mm dynamic driver,
frequency response 20Hz – 20KHz +/- 3dB
Resistance: IPX5, water and dust resistant
Weight – total 45g (earbuds 4.5g each)
Compatibility
Suitable for Bluetooth audio supported smartphones,
tablets, notebooks, laptops and computers.
12

Troubleshooting

Common solutions:
If you are experiencing problems with your earbuds:
•
Power on the earbuds (see page 11).
•
Check the status on the LED Lights (see page 7).
•
Charge the battery (see page 8).
•
Move your device closer to the earbuds and away
from any obstructions or interference.
•
Try connecting to another device.
See Q&A below for more queries and if you are unable
to identify the problem then contact our customer service
team online (see page 16).
Q. My earbuds won't connect to each-other / only one
earbud is paired with my phone?
A. Turn off the earbuds by placing them back into the
charging case.
Take them out and before they connect to your phone,
double press the Multi-function Buttons on the back
of one of the earbuds – this will force it to look for the
other earbud and connect to it.
13