Matco Tools MCL16P Instructions De Fonctionnement page 7

MATCO 16V CORDLESS TOOLS
Matco Tools warrants this tool for a period of (2) years from
the original date of purchase . In the second year, if inspection
shows the trouble is caused by a defect in material and/
or workmanship, Matco will repair (or replace at our option)
without charge . Registration is required through your local
authorized Matco distributor and/or by submission of completed
registration form included with the product . Defective products
must be returned and analyzed by Tri-County Power Tool, Inc .
for the United States or HT Pneumatic Rebuilders for Canada,
at the addresses listed below, freight prepaid . Any tool that has
been serviced by the user or by an unauthorized service center
will subsequently void the warranty of the tool .
Misuse, abuse or normal wear of a product is not covered under
warranty .
Defects in material and workmanship do not apply where the
issues below are present:
• Repairs were made or attempted by unauthorized service
center or individual .
• Repairs are required because of normal wear and tear on
the tool . Normal wear and tear items to include but not
limited to carbon brushes, TPR (rubber grip portions) wear,
switch failure, PCB (internal circuit board wear), socket
retaining rings, etc . These are examples of some failures
that may not be covered under defects in material and
workmanship but are considered normal wear and tear .
• The tool has been misused, abused, or not given the
proper maintenance . (example, Cordless ratchet heads
should be greased, tool motors should not be exposed to
harmful substances such as (cleaning chemicals, excessive
dust and dirt, and metal shavings or debris) .
• Alterations or improper accessories were used with the
product .
MCL16P
MCL16P 16V Mini Polisher
MATCO CORDLESS WARRANTY
7
MATCO 16V LITHIUM-ION
BATTERY MCL1620LB / CHARGER MCL16CHRG
Matco Tools warrants its 16V Lithium-ion (battery/charger) to
be free from defects in material and workmanship for a period
of (2) years from the original date of purchase . Registration is
required through your local authorized Matco distributor and/
or by submission of completed registration form included
with the product . If the battery/charger should fail within the
warranty period, it must be returned and analyzed by Tri-County
Power Tool, Inc . or HT Pneumatic Rebuilders at the addresses
listed below, freight prepaid . A battery capacity defect could
be defined as the battery no longer accepting a charge, or
holding a charge for the battery manufacturing specified period
as determined by Matco Tools Repair center . Based on the
evaluation, Matco Tools, at their discretion, will either repair
or replace any batteries to be found defective in material or
workmanship at no charge . Please see Matco Battery Care
Guide in the Cordless Operating Manual for any of the Infinium
products . You will find helpful tips that may maximize the useful
life of your battery .
Address for Returns as follows:
TRI-COUNTY POWER TOOL, INC.
1300 Brookpark Rd .
Cleveland, OH 44109
(216) 398-6120
Fax: (216) 398-6121
Toll Free: 1-866-873-8278
HT PNEUMATIC REBUILDERS
22 Goodmark Place Unit #8
Toronto, ON M9W6R2
(416) 213-0172
11/18/14