How To Operate - NOSTALGIA PRODUCTS RF6RRAQ Manuel D'utilisation

HOW TO OPERATE

Before first use, clean your BEVERAGE COOLER & WARMER by removing the
shelf and cleaning the cabinet interior and shelf with a slightly damp, non-
abrasive sponge, towel or cloth. Wipe with a non-abrasive towel to dry.
DETERMINE CURRENT TYPE
Alternating Current (AC) - When using unit
in a standard 120 volt electrical wall outlet, use
the AC power cord. Plug AC power cord into the
designated AC receiver on the back panel.
Direct Current (DC) - When using unit in a 12 volt
auxiliary power outlet (common in cars, trucks, boats,
etc.), use the DC power cord. Plug DC power cord
into the designated DC receiver on the back panel.
MODE SELECTION
OFF - Toggle the switch on the back panel
to "OFF" to turn off the unit. Neither the red
or green indicator lights will illuminate.
COLD - Toggle the switch on the back panel to
"COLD" to cool the unit down to 45°F based on
an ambient room temperature of 70°F. When
selected, the green indicator light will illuminate.
HOT - Toggle the switch on the back panel to
"HOT" to warm the unit up to 130°F based on
an ambient room temperature of 70°F. When
selected, the red indicator light will illuminate.
BASIC OPERATION
1. Before operating, be sure the power switch is in the OFF position. Attach
the appropriate power cord to the back panel, then plug the other end
of the power cord into the appropriate socket or electrical outlet.
2. Once plugged in, toggle the power switch to COLD or HOT.
NOTE: When alternating between COLD and HOT functions, toggle the
power switch to OFF first. After 5 minutes, toggle to COLD or HOT.
3. Twist door latch clockwise to open door, then place beverages or food into unit.
NOTE: For best results, refrigerate or heat items before placing in unit.
7